![A parked 1969 Pontiac GTO Judge](https://animalsfun.fun/wp-content/uploads/2024/05/1969-Pontiac-GTO-Judge----Mecum4.jpg)
The first few years that the Pontiac GTO was produced were great years for the carmaker, but once the competitors saw how popular the muscle car was, plenty of choices were presented in front of consumers. Unfortunately for Pontiac, many of them were cheaper to buy, making the GTO a mid-level priced car with nothing that made it stand out. The Judge was first designed to fix that issue, creating a version of the GTO that was stripped of everything it didn’t need, which would decrease the cost of the car to build and sell. However, that is not how the project ended up being.
4 Designed To Outsell The Roadrunner
![A parked 1969 Pontiac GTO Judge convertible](https://animalsfun.fun/wp-content/uploads/2024/05/1969-Pontiac-GTO-Judge-convertible----Greg-Gjerdingen-via-Wikimedia-Commons.jpg)
One of the biggest rivals that the Pontiac GTO had was the Plymouth Roadrunner. It was a muscle car built to equal the quality levels of the GTO, but it was offered to the public at a more reasonable price. This meant that if the GTO ever had a chance of outselling the Roadrunner, the carmakers needed to develop a new car that could recapture the hearts of consumers. The Judge became a design focused on doing just that, but instead of making it a bare-bones muscle car, it became a hopped-up version of the GTO that ended up costing $368 more than the Plymouth and $337 more than the base-level GTO.
5 The Logo And Its Origins
![A parked 1970 Pontiac GTO Judge](https://animalsfun.fun/wp-content/uploads/2024/05/1970-Pontiac-GTO-Judge----Mecum.jpg)
The design of the logo was not set upon the shoulders of DeLorean or any of the other engineers on the project. Instead, the task was assigned to William Porter, a career designer for General Motors. Just like the engineering team, Bill found outside inspiration when trying to come up with the perfect logo for the car. Porter saw an engaging magazine advert from Carter’s India Ink that caught his attention. From there, a simple pencil-to-paper sketch brought to life the logo found on the front fender of every Judge produced.
6 Only Available For Three Years
![A parked 1969 Pontiac GTO Judge](https://animalsfun.fun/wp-content/uploads/2024/05/1969-Pontiac-GTO-Judge----Bring-A-Trailer.jpg)
It is not common knowledge that the Pontiac Judge was offered for three years because the ones commonly talked about were produced in 1969 and 1970. The fact is that there were a little over 300 Pontiac GTO Judges built for the 1971 model year, but because of a severe decline in sales, the car was retired. The GTO continued to be produced for another three years, ending its short run in 1974. If looking for a rare vehicle, the 1971 models should be the goal, but if a classic that’s worth the money is more important, the 1970 model is the Judge to obtain.
7 Powered By A 400 Ram Air III
![A parked 1969 Pontiac GTO Judge](https://animalsfun.fun/wp-content/uploads/2024/05/1969-Pontiac-GTO-Judge----Mecum2.jpg)
The standard engine designed for the Pontiac GTO Judge was the 400 Ram Air III, which could produce up to 366 horsepower and ground pounding torque of 445 pound-feet. The track times for this engine show that it could sprint from 0 to 60 in around seven seconds and complete the quarter-mile run in under 15 seconds. There was also an option when ordering the Judge to upgrade the motor to the 400 Ram Air IV that could push out a little more power and cut a few seconds off the track times, but not many were opted for.
8 Endura Plastic Made The Nose
![A parked 1969 Pontiac GTO Judge](https://animalsfun.fun/wp-content/uploads/2024/05/1969-Pontiac-GTO-Judge----Sicnag-via-Wikimedia-Commons2.jpg)
The Pontiac GTO was the only car in the late ’60s and early ’70s to have a bumper designed with a new material known as Endura Plastic. It was a combination of closed-cell urethane foam bonded to the metal. This rubber coating made the car withstand impact without damage, as seen in the advertisements. Throughout the year, consumers could see men in white lab coats taking turns hitting the front of the car with crowbars without causing any damage.
9 Tachometer Mounted On The Hood
![A parked 1969 Pontiac GTO Judge tachometer](https://animalsfun.fun/wp-content/uploads/2024/05/1969-Pontiac-GTO-Judge-Tachometer----Mecum.jpg)
People that like to push the limits of speed in their cars know all too well how vital a tachometer is to have. For the car to perform at its best, the RPMs must be at optimal levels, pushing the engine to the limits of operation. If a car back in the ’60s and ’70s had a tachometer installed, they were either designed into the dash or added on pieces that the owner could install. The Judge decided to make it easy for the driver to see the tachometer by placing it on top of the hood in the direct eyesight of the one slamming through the gears.
10 Hurst T-Handle Floor Shifter
![A parked 1969 Pontiac Judge interior](https://animalsfun.fun/wp-content/uploads/2024/05/1969-Pontiac-GTO-Judge-Interior----Mecum.jpg)
By the end of the 1960s, Hurst was well-known in the muscle car community. The basic knob handle on many manual transmissions does not give the grip needed to slam through the gears effectively, which is the entire premise behind the T-Handle floor shifter. It makes it easy for the driver to hold on through the acceleration curves and slip into the next gear as the hood-mounted tach shows redline